UV Material
 Visible Material
 IR Material
 Color Material
 Sperical Material

Fused Silica (UV Grade SiO2)
Fused silica is often used in near infrared systems performing in the 0.8-2.5µm spectral region. It is also frequently used at the popular 1.064µm Nd:YAG laser wavelength.
The material has high homogeneity and good transmission in the visible and near infrared spectral regions. Cost of the material ranges widely by type and purity. However the most common Fused Silica for infrared use is quite a bit more expensive than Silicon and slightly less expensive than Calcium Fluoride or ZnS Multi-spectral grade. Due to the materials inherently hard SiO2 amorphous structure, the material is not diamond turnable. Typical specifications for surface quality in the near infrared regions are a 40-20 scratch dig.
Transmission Range
0.18µm to 2.5µm
2.202 g/cm3
Thermal Expansion
5.5 x 10-7 /°C @ 20°C to 320°C
Surface Finish
Fused Silica polishes extremely well & polishes of 10-5, or 20-10 scratch-dig are achieved at extra costs respectively, mainly for UV & visible applications.
Surface Figure
Surface figure of 1/10 wave to 1/4 wave @ 0.6328 µm are specified mostly on lenses for ultraviolet & visible use.
AR Coating Options
Typical available infrared coatings are a BBAR from 0.8- 2.5µm & an AR coating for 1.064µm wavelength.
Typical Applications
Thermal imaging, Astronomical, Microlithography, Excimer laser applications, Nd:YAG laser applications.
Products Manufactured
Lenses, Windows, Wedges, Optical Beamsplitters, Optical Filters, Prism.
Wavelength (µm)
Index of Refraction (n)